[{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/726/original/IMG_0881.jpeg?1709503764","metadata":{"caption":""}},{"element_type":"text","content":"\n        \u003cp\u003eI just couldn't bring myself to use the standard practice of soldering pins onto breakout boards using a solderless breadboard in spite of the recommendations and endorsements of some famous solder artists. I would cringe thinking that the heat would eventually warp the plastic portion of the board. It is a \u003cem\u003esolderless\u003c/em\u003e breadboard after all.\u003c/p\u003e\n\u003cp\u003eFortunately, after placing many Adafruit orders over the years, I had build up quite a collection of free half-sized Perma-Proto breadboards. The solution for creating a non-destructive soldering jig became obvious. Stack four Perma-Proto PCBs together, use a couple of M3 nylon screws and nuts, and place some rubber feet on the bottom. \u003cspan\u003eVoilà!\u003c/span\u003e\u003c/p\u003e\n\u003cp\u003eSadly, the Perma-Proto board is no longer offered as a free product promotion. That's okay; I still have enough in the inventory for many future projects. And coasters. I have coasters.\u003c/p\u003e\n      ","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/727/original/IMG_0884.jpeg?1709503827","metadata":{"caption":""}},{"element_type":"product","content":"https://www.adafruit.com/product/571","metadata":{}},{"element_type":"product","content":"https://www.adafruit.com/product/4685","metadata":{}},{"element_type":"product","content":"https://www.adafruit.com/product/550","metadata":{}}]