MatrixPortal Board Twister (HUB75 Adapter)

Last updated March 08, 2024

Save

Getting Started

Adafruit Playground is a wonderful and safe place to share your interests with Adafruit's vibrant community of makers and doers. Have a cool project you are working on? Have a bit of code that you think others will find useful? Want to show off your electronics workbench? You have come to the right place.

The goal of Adafruit Playground is to make it as simple as possible to share your work. On the Adafruit Playground users can create Notes. A note is a single-page space where you can document your topic using Adafruit's easy-to-use editor. Notes are like Guides on the Adafruit Learning System but guides are high-fidelity content curated and maintained by Adafuit. Notes are whatever you want them to be. Have fun and be kind.

Click here to learn more about Adafruit Playground and how to get started.

Requirement: Place an RGB display panel with an attached MatrixPortal in a shadow box.
Problem: The MatrixPortal sticks out.
Solution: Spin it around with a custom OSHPark AfterDark board.

The panel connector is a standard 2-row by 8-pin IDC plug. The top spacer is M2.5 10mm and is attached to the bottom spacer using a nylon M2.5 10mm screw with the head removed (threads only).

The panel connector is a 2-row by 10-pin header (0.1-inch) with the top two and bottom two pins removed. The bottom spacer is M2.5 12mm with a screw added to provide another 1mm depth.

This page (MatrixPortal Board Twister (HUB75 Adapter)) was last updated on March 08, 2024.