[{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/002/280/original/memento_assy.jpg?1772731030","metadata":{}},{"element_type":"text","content":"\n  \n  \n        \u003cp\u003eThis is a simple front plate for use with an Adafruit \u003ca href=\"https://www.adafruit.com/product/5420\"\u003eMEMENTO camera\u003c/a\u003e and the available \u003ca href=\"https://www.adafruit.com/product/5843\"\u003eenclosure kit\u003c/a\u003e. There is a more enclosed (and super cute) 3D printable case option\u0026nbsp;\u003ca href=\"https://learn.adafruit.com/memento-3d-case\"\u003ehere\u003c/a\u003e that works with just the base camera. But I like the look of the \"open frame\" style of the enclosure kit. Also, I find I don't use the front facing NeoPixels for photographic lighting, but do use them as general purpose indicators. So this 3D printable plate sits on top (on front?) of the NeoPixel plate, covering them and providing some diffusion. There is also a simple bump out handle to aid in holding. It should work with the fasteners included with the enclosure kit.\u003c/p\u003e\n      \n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/002/281/original/memento_front.png?1772731788","metadata":{}}]