The TactileAudio project is a set of plans, instructions, and ready-to-use software for building a four-channel touch/proximity-sensitive (capacitive) audio project. With TactileAudio, you to create touch-sensitive objects, such as paintings, sculptures, clothing, and so forth, that respond to touch and proximity by playing fixed audio files (music, stories, soundscapes, …) that you create.
Artists and storytellers have created an amazing variety of projects with this (and similar) technology, including immersive war journals, global-warming stories, personal reflections activated by a touch to clothing, interactive dances, and much more.
Spring Terminal Blocks -- 5 pack
NOTE: Order either these or the screw-terminal blocks (below), not both. It's your choice, whichever you prefer.
These snap-together terminals will be reconfigured into a 4-pin configuration
Order 1 pack (for audio-only projects)
Order 2 packs (for projects with vibrator outputs)
Screw Terminal Blocks
NOTE: Order either these or the spring-terminal blocks (above), not both. It's your choice, whichever you prefer.
Order 3 (for audio-only projects)
Order 5 (for projects with vibrator outputs)
Male Headers -- 10 pack
Order 1 pack.
NOTE: If these are out of stock, click the "Out of Stock" button and check other colors.
Female Headers -- 5-pack
Order 1
NOTE: If these are out of stock, click the "Out of Stock" button and check other colors.
Heat-Shrink Tubing
Optional - fast, reliable, and easy way to insulate wires after you solder them together. This is a nice starter pack, but there are a number of other choices. You'll need a match or lighter to shrink the tubing.
USB Cable
Optional, you may have this already. Any USB with standard size on one end and micro on the other will work.
Soldering Iron
Required (if you don't own one). Any good pencil-style soldering iron will work. (Do NOT use a soldering "gun"; these are much too hot.)
NON-USA: This is for American 110 volts; you should order locally to get the correct voltage and plug style.
Solder
I recommend lead/tin solder; it melts at a lower temperature than lead-free and is less likely to damage components. Lead on your hands is harmless, just don't eat it! If you're concerned about lead, there are good lead-free solder alternatives.
Half-sized Breadboard PCB
OPTIONAL - For practicing soldering. If you are new to soldering and would like to practice before you start soldering your actual project, order one of these. You can practice soldering a spare header socket to it.
This page (TactileAudio Project: Four-Channel Touch-Sensitive Audio Player) was last updated on August 08, 2025.