Getting Started
Adafruit Playground is a wonderful and safe place to share your interests with Adafruit's vibrant community of makers and doers. Have a cool project you are working on? Have a bit of code that you think others will find useful? Want to show off your electronics workbench? You have come to the right place.
The goal of Adafruit Playground is to make it as simple as possible to share your work. On the Adafruit Playground users can create Notes. A note is a single-page space where you can document your topic using Adafruit's easy-to-use editor. Notes are like Guides on the Adafruit Learning System but guides are high-fidelity content curated and maintained by Adafuit. Notes are whatever you want them to be. Have fun and be kind.
Click here to learn more about Adafruit Playground and how to get started.
-
Dragon Ball Radar Tutorial
This post was originally published on extralongdivision.com
Introduction
Keep reading if you want to build your own Dragon Radar from the internationally acclaimed Dragon Ball franchise. For general information about the project, read the project overview. If you want deep technical details, read the latest developer log.
Before you begin, you’ll need to acquire some tools and parts. The files to manufacture the 3D1 printed components and PCBA2 are available on the project's repository.
If you don’t have the means to produce the PCBA and 3D printed parts yourself, you can use a contract manufacturer that services your region. Exact providers will vary based on where you live.
Parts
- Enclosure front (3D printed)
- Enclosure Back (3D printed)
- Button shaft (3D printed)
- Button top (3D printed)
- M2x0.4mm threaded insert (x7)
- M2x8mm set screw
- M2x4 fastener (x6)
- HD40015C40 4" round display
- Dragon Radar V1.1 PCBA
- M1x0.25mm threaded insert (x6)
- M1x4mm screw (x6)
- Double-sided tape
- Lithium polymer battery
- Mini oval speaker
Tools
At minimum you’ll need:
- A screwdriver for the fasteners
- A heat stake or soldering iron
- Scissors
Not required, but useful tools:
- Tweezers
- Needle nose pliers
Flashing Firmware
Using the binary file in the project's repository, follow the instructions provided by Adafruit to install CircuitPython on the board. Once complete, drag-and-drop the source code available on the project's repository. After firmware upload, a heartbeat LED3 will blink once the board recieves power.
Assembly Procedure
Below are step-by-step instructions to build the project. Cross-reference the numbered list in the Parts section to identify components.
Below are step-by-step instructions to build the project. Cross-reference the numbered list in the Parts section to identify components.
- Gather M1 heat-set inserts and the enclosure front.

Use a soldering iron to install six (6) M1 heat set inserts in the enclosure front.
- The enclosure front should look something like this.

- Gather M2 heat-set inserts and the enclosure front.

Use a soldering iron to install six (6) M2 heat set inserts in the enclosure front.
- The enclosure front should look something like this.

- Gather the button shaft, button cap, and M2 heat set inserts.

Use a soldering iron to install the M2 heat set inserts into the button shaft and button cap
- The parts should now look something like this.

- Install the button shaft sub-assembly into the enclosure front.

- Gather an M2 set screw.

Install the M2 set screw into the button shaft so it partially protrudes.
- The sub-assembly should look something like this now.

Install the button cap onto the partially extruded M2 set screw
- The enclosure front should look somthing like this now

- Gather a HD40015C40 round display.

- install the display in the enclosure front.
- The sub-assembly should look something like this now

- Gather a PCBA.

- Place the PCBA in the enclosure front.
- Attach the display ribbon cable to the PCBA connector.

- The sub-assembly should look something like this now

- Gather M1 screws.

- Use the M1 screws to fasten the PCBA into the enclosure front.
- It’s hard to see but the sub-assembly should look something like this now.

- Gather a battery and double-sided-tape

- Insert the battery connector into the PCBA and secure it with double sided tape.
- The enclosure sub-assembly should look like this now.

- Gather the enclosure back and a speaker

- Depending on your part tolerance, the speaker can friction fit into into the enclosure back. If not, expose the adhesive tape on the speaker.

- Now, install the speaker into the enclosure back.
- The sub-assembly should look something like this now.

- Gather the enclosure front and back sub-assemblies.

- Insert the speaker cable into the PCBA connector.
- The assembly should look something like this now.

- Gather M2 screws and the radar sub-assembly.

- Using a screwdriver, fasten the enclosure back into the enclosure front with six (6) M2 screws.
- The back of the Dragon Radar should look like this.

You’re done!

Part of the Dragon Radar series:
- Dragon Ball Radar Project Overview, October 12, 2026
- How To Make a Dragon Ball Radar, October 12, 2026
- Dragon Ball Radar: Devlog 2, October 2, 2026
- Dragon Ball Radar: Devlog 1 - Frankenstein, August 29, 2026
-
Dragon Ball Radar: Devlog 2 - Prototype!
This note was originally posted on extralongdivision.com
Previously on Dragon Ball Z!
In the last installment of this project I proved the concept with a Frankenstein dragon radar. I’ve actually got something that looks like the real deal now. Keep reading to learn about the development since the last update. In a future post I’ll detail the steps to reproduce the project.
Electrical Design
This section will be short. I had two action items since the last update and I only did one of them. Originally I wanted to make the board 0.8 mm1 instead of 1.6 mm. I decided to keep the PCB2 the same size since that’d lower the USB-C3 connector coming out the back of the enclosure (ominous noises). Also, even if the mounting pins weren’t soldered into place, the SMT4 pads would still adhere the connector to the board.
The only electrical change I did was flip the battery connector polarity to match the ones I already have.

Left: Version 1 battery connector with reversed polarity. Right: Version 1.1 battery connector with correct polarity.
Mechanical Design
Last post, I said I’d wait until new PCBs arrived before redesigning the enclosure. This cost me a couple days of messing with clearance just to mount the PCB. Ultimately I had to make the enclosure’s diameter bigger to correct this. Ironic, since that’s what I was trying to avoid during the original design phase described in the last post.
The button actuator was another issue that I would’ve recognized sooner if I tried to assemble the radar.

The actuator interferes with the user button such that it’s impossible to mount the PCB, even with the aforementioned clearance. Cutting a slot for the user button fixed the issue.

Once I fit the PCB inside the enclosure, I couldn’t actually press the user button because the actuator interfered with the board.

I fixed this by making the enclosure thicker and mounting the PCB in a deeper recess. But now the whole radar is too large to palm in one hand and press the button at the same time. I mentioned a wrist strap in the last post, but using one doesn’t actually help, or at least the ones I have don’t. Here’s me holding the radar as best as I can with a wrist strap on.

A consequence of a thicker enclosure is the USB-C connector not being flush with the slot in the back. Said slot is larger to accommodate a more recessed connector.

So it didn’t matter if the PCB was 0.8 mm or 1.6 mm. Again, I did this mechanical work after the boards arrived. Lesson learned.
Lastly, the speaker nest was so tightly toleranced that removal caused disassembly.

The speaker still works, thankfully. This mishap is actually a feature. A friction fit makes foam tape unnecessary to keep the speaker in place.
Board Bring up
Everything was plug and play with the updated PCB (version 1.1). I followed the same steps to put CircuitPython on the board and my code ran with no problem. This proves that the
SD_MODEpull up resistor I changed to 1M ohms didn’t affect the sound quality from the first round of board bring up.I did see some differences between PCB version 1 and version 1.1 though. For V1, uploading new code only worked after a hard power reset. Pressing the reset button on the board didn’t help. This problem never happened with version 1.1. Also, the screen would glitch as if the signal timing was off whenever the heartbeat LED5 was on. Again, only for version 1 of the PCB. Not an issue for version 1.1. I haven’t reproduced this on camera yet.
I’m also seeing streaks of discoloring on the display that I wasn’t seeing earlier. It doesn’t show up in photos well, but soft peach/orange vertical blotches overlay whatever’s being shown. It’s especially visible when the screen powers off. Not sure if this is a result of me driving the display incorrectly or some other problem. Either way, it’s negatively affecting the replica’s authenticity.
Cosmetics
If the cover photo didn’t give it away, I didn’t do any post processing on the enclosure. I don’t like the aesthetics, but I’m de-prioritizing looks over other projects/potentially adding more features.
One practical cosmetic issue is screen brightness in direct sunlight. Here’s a side-by-side of the radar in the shade vs the sun.

Left: dragon radar in shade. Right: dragon radar in direct sunlight
The two images accurately represent the difference between shaded and direct light to the naked eye. For the latter, the display acts more like a mirror than a screen. I believe I’m driving the backlight at 100% brightness, but it is still not the most readable in the sun. Using the project for an outdoor scavenger hunt would be very difficult. I might have to source a different screen for future iterations.
Next Steps
I consider the first phase of this project done. The design files are available on the, still undocumented, repository. I promise to have a proper README there once I post the build tutorial here. Be on the lookout for some video content with the radar too.
-
Dragon Ball Radar: Devlog 1 - Frankstein
This article was originally posted on extralongdivision.com. Read the full content there. A shorter version with less pictures to keep Adafruit Playground happy is reproduced below.
Inspiration
If you want a real life Dragon Radar, there are a small amount of toys to choose from.