[{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/291/original/hero.jpeg?1730231252","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eIf you grew up with a Nintendo Entertainment System, you probably remember playing games like Duck Hunt that used the Nintendo Zapper \"light gun\". The Zapper used a clever technique that depended on the game being displayed on a Cathode Ray Tube, or CRT television. These days, CRTs are rare, and are often prized collectors items among retro gaming enthusiasts. Since these Zappers don't work on modern TVs, most people don't have much use for them anymore. So, why not convert it into a toy/prop that lights up and plays sounds?\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eOverview\u003c/h1\u003e\n\u003cp\u003eThis project uses a Prop-Maker Feather RP2040 to repurpose the the Zapper's iconic shell and clicky trigger mechanism into a prop/toy that uses a NeoPixel for a \"muzzle flash\", a speaker to play sound effects, and 3D printed parts to contain the electronics. The code is written in CircuitPython, and sounds can be changed or added by dragging and dropping files with no code changes required!\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"product","content":"https://www.adafruit.com/product/5768","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eTable of Contents\u003c/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#materials-3186832\"\u003eMaterials\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\n\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#3d-printed-parts-3186833\"\u003e3D printed parts\u003c/a\u003e\n\u003col\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#1-neopixel-mount-3186867\"\u003eNeoPixel mount\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#2-neopixel-diffuser-3186868\"\u003eNeoPixel diffuser\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#3-grip-attachment-3186869\"\u003eGrip Attachment\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#4-grip-attachment-cover-slash-prop-maker-feather-mount-3186870\"\u003eGrip Attachment Cover/Prop-Maker Feather mount\u003c/a\u003e\u003c/li\u003e\n\u003c/ol\u003e\n\u003c/li\u003e\n\u003cli\u003e\n\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#build-steps-3186835\"\u003eBuild steps\u003c/a\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#1-install-circuitpython-and-source-code-3186838\"\u003eInstall CircuitPython and source code\u003c/a\u003e\u0026nbsp;\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#2-prepare-zapper-shell-3186836\"\u003ePrepare Zapper shell\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#3-solder-power-toggle-switch-3186840\"\u003eSolder power toggle switch\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#4-solder-and-wire-speaker-3186842\"\u003eSolder and wire speaker\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#5-solder-and-wire-neopixel-3186844\"\u003eSolder and wire NeoPixel\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#6-solder-and-wire-trigger-3186846\"\u003eSolder and wire trigger\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#7-final-assembly-3186848\"\u003eFinal assembly\u003c/a\u003e\u003c/li\u003e\n\u003c/ol\u003e\n\u003c/li\u003e\n\u003cli\u003e\n\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#operation-3186959\"\u003eOperation\u003c/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#changing-sounds-3186851\"\u003eChanging sounds\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://adafruit-playground.com/u/squid_jpg/pages/guide-zapper-lights-sound-mod#adjusting-volume-3186962\"\u003eAdjusting Volume\u003c/a\u003e\u003c/li\u003e\n\u003c/ul\u003e\n\u003c/li\u003e\n\u003c/ul\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eMaterials\u003c/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https://www.adafruit.com/product/5768\"\u003eProp-Maker Feather\u003c/a\u003e\u0026nbsp;\u003c/li\u003e\n\u003cli\u003eMini oval speaker: \u003ca href=\"https://www.adafruit.com/product/4227\"\u003eShort cable\u003c/a\u003e or \u003ca href=\"https://www.adafruit.com/product/3923\"\u003elonger cable\u003c/a\u003e\n\u003c/li\u003e\n\u003cli\u003e1 \u003ca href=\"https://www.adafruit.com/product/1938\"\u003e5mm Thru-Hole NeoPixel\u003c/a\u003e\n\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/805\"\u003eSlide switch\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/1578\"\u003e500 mAh LiPo battery\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e2 \u003ca href=\"https://www.adafruit.com/product/3299\"\u003eM2.5x10mm nylon screws and nuts\u003c/a\u003e\n\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.amazon.com/dp/B09X4QFCZS\"\u003e28 gauge 5-wire silicone ribbon\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.amazon.com/gp/product/B085CKB3NS/\"\u003e3/32\" (2.4mm) heat shrink tubing\u003c/a\u003e\u003c/li\u003e\n\u003c/ul\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003e3D Printed parts\u003c/h1\u003e\n\u003cp\u003eFour parts are needed for this mod. The STLs for these parts can be found \u003ca href=\"https://www.printables.com/model/1055700-nintendo-zapper-proptoy-mod\"\u003ehere on Printables\u003c/a\u003e. All parts printed with a\u0026nbsp;\u003cstrong\u003e0.2mm layer height\u003c/strong\u003e and \u003cstrong\u003e15% infill\u003c/strong\u003e. Each part may need other additional settings as well. Prusa Slicer .3mf and .gcode files are also provided.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e1. NeoPixel mount\u003c/h2\u003e\n\u003cp\u003eModel file: \u003cstrong\u003eled-mount.stl\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eThis part holds the NeoPixel in place. The part is printed upside-down in \u003cstrong\u003eblack\u003c/strong\u003e filament, and \u003cstrong\u003etree/organic supports\u003c/strong\u003e are used on the top surface of the bottom lip of the LED holder, as well as the top of the main cylinder (see image below).\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/292/original/led-mount-supports.png?1730233099","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/297/original/led-mount-sliced.png?1730233921","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e2. NeoPixel Diffuser\u003c/h2\u003e\n\u003cp\u003eThere are two options for the diffuser. If you have an orange Zapper, the preferred option is to print the \u003cstrong\u003eangled black-and-white diffuser\u003c/strong\u003e, which helps prevent light bleed through the Zapper's plastic shell. A simpler alternative is the\u0026nbsp;\u003cstrong\u003eall-white diffuser,\u003c/strong\u003e which can be used if you are using a gray Zapper shell (which does not suffer from the light bleed issue), or are not able to print the black-and-white version.\u003c/p\u003e\n      \n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch3\u003eAngled black-and-white diffuser\u003c/h3\u003e\n\u003cp\u003eModel file: \u003cstrong\u003ebarrel-tip-angled.stl\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eThe NeoPixel diffuser is printed at a 30 degree angle with a\u0026nbsp;\u003cstrong\u003ebrim\u003c/strong\u003e using \u003cstrong\u003esupports on build plate only\u003c/strong\u003e, and is printed with \u003cstrong\u003eblack\u003c/strong\u003e and \u003cstrong\u003ewhite\u003c/strong\u003e filament. The print starts with \u003cstrong\u003eblack\u003c/strong\u003e filament, and then at \u003cstrong\u003elayer 131\u003c/strong\u003e we change to \u003cstrong\u003ewhite\u003c/strong\u003e filament. This masks out the light from the LED along the contours of the Zapper barrel, preventing light bleed through the orange shell.\u0026nbsp;\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/293/original/diffuser-sliced.png?1730233451","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/294/original/diffuser-layer-change.png?1730233470","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n        \u003ch3\u003eAll-white diffuser\u003c/h3\u003e\n\u003cp\u003eModel file: \u003cstrong\u003ebarrel-tip.stl\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eIf you can't print the black and white version, or have a gray Zapper shell, you can print this non-rotated version\u0026nbsp; \u003cstrong\u003ewithout supports\u003c/strong\u003e in \u003cstrong\u003ewhite\u003c/strong\u003e filament (you may need a \u003cstrong\u003ebrim\u003c/strong\u003e).\u003c/p\u003e\n      \n","metadata":{}},{"element_type":"alert","content":"\u003cp\u003eIf you are using an orange Zapper with the all-white diffuser, some light from the NeoPixel will bleed through the orange plastic of the tip of the barrel.\u003c/p\u003e","metadata":{"class":"element row-fluid alert-element build-alert alert-warning","markdown":"If you are using an orange Zapper with the all-white diffuser, some light from the NeoPixel will bleed through the orange plastic of the tip of the barrel.","alert_type":"warning"}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e3. Grip Attachment\u003c/h2\u003e\n\u003cp\u003eModel file: \u003cstrong\u003ezapper-mount-propmaker.stl\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eThe grip attachment is printed using\u0026nbsp;\u003cstrong\u003eblack\u003c/strong\u003e filament with \u003cstrong\u003egrid supports\u003c/strong\u003e on the portions indicated in the image below.\u003c/p\u003e\n\u003cp\u003eRemoving the supports from this part can be tedious, so take your time, be careful, and make sure to remove all of the support material to ensure the best fit possible when mounting to the Zapper shell.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/295/original/grip-attachment-supports.png?1730233768","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/296/original/grip-attachment-sliced.png?1730233788","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e4. Grip attachment cover/Prop-Maker Feather mount\u003c/h2\u003e\n\u003cp\u003eModel file: \u003cstrong\u003ezapper-mount-propmaker-cover.stl\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eThis part acts as the cover for the electronics compartment. The Prop-Maker Feather is mounted onto this part using 2 screws and nuts. The cover is printed as-is with no supports using \u003cstrong\u003eblack\u003c/strong\u003e filament.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/298/original/cover-slicer.png?1730234174","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eBuild steps\u003c/h1\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e1. Install CircuitPython and source code\u003c/h2\u003e\n\u003cp\u003eFollow the instructions from \u003ca href=\"https://learn.adafruit.com/adafruit-rp2040-prop-maker-feather/circuitpython\"\u003ethis learn guide\u003c/a\u003e to install the latest version of CircuitPython 9 to your Prop-Maker Feather.\u003c/p\u003e\n\u003cp\u003eThen, download or clone the \u003ca href=\"https://github.com/apendley/zapper-mod\"\u003ezapper-mod repo\u003c/a\u003e from github. Copy the contents of the \u003cstrong\u003eCIRCUITPY-ZAPPER\u003c/strong\u003e directory into the root of your Prop-Maker's \u003cstrong\u003eCIRCUITPY\u003c/strong\u003e drive.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e2. Prepare Zapper Shell\u003c/h2\u003e\n\u003cp\u003eRemove the screws circled in blue below from the outer shell of the Zapper. Set the screws and the outer shell aside in a safe place.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/299/original/disassemble-outer-shell-screws.jpeg?1730234987","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eRemove the remaining screws circled in blue below. Use a Phillips head screwdriver for the big screws, and a small flat head screwdriver for the small barrel screws. Set the screws aside in a safe place.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/300/original/dissasemble-inner-shell-screws.jpeg?1730235099","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eCarefully remove the top shell. Observe the original parts, labeled below:\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003eLens\u003c/li\u003e\n\u003cli\u003eBarrel weight\u003c/li\u003e\n\u003cli\u003eOriginal PCB\u003c/li\u003e\n\u003cli\u003eTrigger mechanism\u003c/li\u003e\n\u003cli\u003eGrip weight\u003c/li\u003e\n\u003cli\u003eCord\u003c/li\u003e\n\u003cli\u003eTop half of Zapper inner shell\u003c/li\u003e\n\u003c/ol\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/301/original/opened-up.jpeg?1730235393","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eRemove the screws circled in blue below, and set aside in a safe place.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/302/original/trigger-screws.jpeg?1730235673","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eRemove the original PCB, trigger mechanism, and cord from the bottom shell.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/303/original/removed-trigger.jpeg?1730235785","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eCut the wires from the leads on the trigger mechanism.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/304/original/cut-trigger-black-wire.jpeg?1730235965","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/305/original/cut-trigger-red-wire.jpeg?1730236021","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/306/original/free-trigger.jpeg?1730236039","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eRemove the lens. The original PCB, lens, and cord are not needed for this project, feel free to repurpose them for other projects. We'll keep the weights, they make the Zapper feel nice and hefty.\u003c/p\u003e\n\u003cp\u003eSlide the stem of the the grip attachment down into the slot where the cord previously was mounted, as shown in the photos below.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/312/original/grip-attachment-1.jpeg?1730237239","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/313/original/grip-attachment-2.jpeg?1730237257","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e3. Solder power toggle switch\u003c/h2\u003e\n\u003cp\u003eCut a piece of wire from the ribbon wire about \u003cstrong\u003e5 cm\u003c/strong\u003e in length. Pull apart 2 wire strands, Discard the remaining 3 or use for another project. Strip and solder the other end of each wire to two adjacent pins on the slide switch. Apply heat shrink tubing. Strip and solder the other ends of the wire to the \u003cstrong\u003eEN\u003c/strong\u003e and \u003cstrong\u003eGND\u003c/strong\u003e pins of the Prop-Maker Feather.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/307/original/switch-soldering.jpeg?1730236593","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/308/original/switch-soldered.jpeg?1730236606","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e4. Solder and wire speaker\u003c/h2\u003e\n\u003cp\u003eCut a piece of ribbon cable about \u003cstrong\u003e25 cm\u003c/strong\u003e in length. Peel off 2 strands from the ribbon, keeping the strand with the white stripe and the adjacent strand. Discard the remaining 3 or use for another project. Cut the connector from the speaker. Cut 2 pieces of heat shrink tubing about 1 cm long. Place a piece of heat shrink tubing around each wire. Strip and solder the wires to the speaker, connecting the strand with the white strip to the \u003cstrong\u003ered\u003c/strong\u003e (positive) wire of the speaker, and the other wire to the \u003cstrong\u003eblack\u003c/strong\u003e (negative) wire of the speaker. Apply heat to the heat shrink tubing to protect the solder joints.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/309/original/speaker-cut.jpeg?1730236957","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/310/original/speaker-solder.jpeg?1730236987","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/311/original/speaker-heat-shrink.jpeg?1730237000","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePosition the speaker in as shown in the photo below. Thread the wires through the strain relief pillars as shown in the photo, and insert the wire through the hole in the stem of the grip attachment.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/314/original/speaker-wire-threaded.jpeg?1730237538","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePosition the Feather as shown below, about 1 cm below the grip attachment. Cut the speaker wires to trim the excess, leaving enough to strip and plug in to the speaker terminals on the screw terminal block. Plug the wire with the white strip into the speaker \u003cstrong\u003e+\u003c/strong\u003e terminal on the Prop-Maker Feather, and the other wire into the speaker \u003cstrong\u003e-\u003c/strong\u003e terminal.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/315/original/speaker-wire-unattached.jpeg?1730237665","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/316/original/speaker-wire-attached.jpeg?1730237677","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePower on the Feather. You should hear the speaker play a power-on sound effect. Power off the Feather.\u003c/p\u003e\n\u003cp\u003eClean the plastic underneath the speaker with some rubbing alcohol. Remove the adhesive backing from the front of the speaker, and press firmly into place against the Zapper shell.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e5. Solder and wire NeoPixel\u003c/h2\u003e\n\u003cp\u003eObserve the layout of the NeoPixel pins in the image below.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/326/original/led-pins-labeled.jpg?1730239135","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eCut the \u003cstrong\u003eData Out\u003c/strong\u003e lead off of the NeoPixel as shown below. We don't need it and we'll need the space.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/317/original/led-cut-data-out.jpeg?1730238663","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eTrim the remaining 3 leads by half, making sure to keep the \u003cstrong\u003eGround\u003c/strong\u003e lead just a little longer. Gently fan the leads out a little to make them easier to solder.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/319/original/led-cut-leads.jpeg?1730238786","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eCut a piece of ribbon cable to about \u003cstrong\u003e50 cm\u003c/strong\u003e in length. Peel off three of the strands, the one the white stripe and the two adjacent strands. Discard the remaining two or use on another project. Note the wire ordering in the image below. The wire strand with the white stripe is matched to the \u003cstrong\u003e5V\u003c/strong\u003e lead on the NeoPixel. The middle wire is matched to the \u003cstrong\u003eData In\u003c/strong\u003e lead on the NeoPixel. The remaining wire is matched to the \u003cstrong\u003eGround\u003c/strong\u003e lead on the NeoPixel.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/320/original/led-wires-stripped.jpeg?1730238828","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eCut 3 pieces of heat shrink tubing about 1cm long and place over the wires. Solder the wires to the leads on the NeoPixel, and apply heat to the heat shrink tubing to protect the solder joints.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/321/original/led-wires-prepped.jpeg?1730238848","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/322/original/led-wires-soldered.jpeg?1730238862","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eMount the NeoPixel into the LED holder, gently bending the leads into the column if necessary, threading the wire through the body of the LED holder.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/323/original/led-mounted.jpeg?1730238902","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the LED holder near the end of the barrel as shown below. Thread the wire through the barrel weight, through the strain relief pillars, and through the hole in the stem of the grip attachment, as shown below.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/324/original/led-cable-threaded.jpeg?1730238925","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eTrim any excess wire from the ribbon cable, leaving enough slack to strip and insert the wires into the screw terminal mount. Insert the wire with the white stripe into the \u003cstrong\u003e5V\u003c/strong\u003e terminal, the middle wire into the \u003cstrong\u003eNEO\u003c/strong\u003e terminal, and the remaining wire into the \u003cstrong\u003eG\u003c/strong\u003e terminal.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/325/original/led-connected.jpeg?1730238977","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePower on the Prop-Maker Feather. If the NeoPixel is wired correctly, it should light up along with the power-on sound effect. Power off the Prop-Maker.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e6. Solder and wire trigger\u003c/h2\u003e\n\u003cp\u003eCut a piece of ribbon cable about \u003cstrong\u003e25 cm\u003c/strong\u003e in length. Peel off 2 strands, the one with the white stripe, and the adjacent one. Discard the remaining 3 or use for another project. Strip and solder the wire with the white stripe to the lead labeled \u003cstrong\u003eON\u003c/strong\u003e on the trigger. Strip and solder the other wire to the lead labeled \u003cstrong\u003eCOM\u003c/strong\u003e on the trigger.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/327/original/trigger-soldered.jpeg?1730239875","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the trigger on the bottom part of the Zapper shell, aligning the screw holes. Feed the wires you just soldered onto the trigger leads underneath the trigger mechanism, thread through the strain relief pillars, and insert into the hole in the stem of the grip attachment.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/328/original/trigger-placement-1.jpeg?1730240429","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/329/original/trigger-placement-2.jpeg?1730240446","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eTrim any excess wire from the trigger ribbon cable, leaving enough slack to strip and insert into the Prop-Maker terminal blocks.\u003c/p\u003e\n\u003cp\u003eRemove the NeoPixel wire currently plugged into the \u003cstrong\u003eG\u003c/strong\u003e terminal of the Prop-Maker terminal block. On the wires connected to the trigger, strip the wire that does NOT have the white stripe. Twist this wire together with the NeoPixel\u0026nbsp;\u003cstrong\u003eGround\u003c/strong\u003e wire. Insert both of these wires into the \u003cstrong\u003eG\u003c/strong\u003e terminal on the Prop-Maker and tighten. Strip the wire with the white stripe, and insert into the terminal block \u003cstrong\u003eBTN\u003c/strong\u003e pin.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/330/original/trigger-neopixel-grounds.jpeg?1730240635","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePower on the Prop-Maker Feather, and squeeze the trigger. The NeoPixel should light up and the speaker should play a firing sound effect. Power off the Prop-Maker Feather.\u003c/p\u003e\n\u003cp\u003eScrew the trigger mechanism back into the Zapper shell using 3 of the screws you set aside earlier.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/335/original/trigger-screwed.jpeg?1730241725","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003e7. Final assembly\u003c/h2\u003e\n\u003cp\u003eTrim any leads on the bottom of the Prop-Maker Feather that may be poking out, so that the Feather will lay as flat as possible when mounted. Using 2 M2.5 screws and nuts, fasten the Prop-Maker Feather to the grip attachment cover.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/331/original/propmaker-mounted-cover.jpeg?1730241002","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the battery all the way into the compartment and plug into the Prop-Maker Feather's battery connector.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/332/original/battery-plugged-in.jpeg?1730241068","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eInsert the slide switch into the switch mount on the grip attachment.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/333/original/switch-inserted.jpeg?1730241126","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eGently press the snap-fit cover onto the grip attachment, taking care not to pinch any wires.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/334/original/grip-attachment-closed.jpeg?1730241234","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the NeoPixel diffuser into the end of the barrel, sliding it over the NeoPixel, as shown below.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/336/original/diffuser-placement.jpeg?1730241820","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the top half of the Zapper shell onto the bottom half, taking care to insert the grip attachment mounting stem into place, and taking care not to pinch any wires.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/337/original/top-shell-assembled.jpeg?1730241916","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eRotate the diffuser so that none of the black filament is visible. Screw in the two small barrel screws using a small flat-head screwdriver.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/338/original/diffuser-screwed.jpeg?1730241990","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eScrew the two shell halves together using 3 of the screws you set aside earlier.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/339/original/inner-shell-screwed.jpeg?1730242142","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the bottom half of the outer shell underneath the Zapper inner shell.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/340/original/outer-shell-screwed-1.jpeg?1730242234","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003ePlace the top half of the outer shell onto the inner shell, and screw into place using the remaining 3 screws you set aside earlier.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/341/original/outer-shell-screwed-2.jpeg?1730242414","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eThat's it, you're done!\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/342/original/hero.jpeg?1730242488","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eOperation\u003c/h1\u003e\n\u003cp\u003eOperation is simple. Switching the power toggle switch to the \u003cstrong\u003eON\u003c/strong\u003e position will play a random startup sound and play a NeoPixel animation. Partially squeezing and holding the trigger will dimly light up the NeoPixel white. Pulling the trigger all the way (or releasing the trigger after partially squeezing) will cause the Zapper to \"fire\", playing a random firing sound effect and flashing the NeoPixel a random color. Switching the power toggle switch to the \u003cstrong\u003eOFF\u003c/strong\u003e position will power down the Zapper.\u003c/p\u003e\n\u003cp\u003eTo recharge the battery, edit the CircuitPython code, or upload new sounds, simply plug a USB cable into the USB port on the grip attachment.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/344/original/grip-attachment-rear.jpeg?1730256757","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003eChanging sounds\u003c/h2\u003e\n\u003cp\u003eThe sounds played by the Zapper are stored in 2 directories on the \u003cstrong\u003eCIRCUITPY\u003c/strong\u003e drive:\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003esounds/power_on\u003c/li\u003e\n\u003cli\u003esounds/fire\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003eWhen powering on or firing, a random sound will be chosen from the sounds in these directories. To add, remove, or change sounds, simply add, remove, or change the wave files in the \u003cstrong\u003esounds/power_on\u003c/strong\u003e or \u003cstrong\u003esounds/fire\u003c/strong\u003e directory. No code changes required! Currently, sounds must be \u003cstrong\u003e.wav\u003c/strong\u003e files at \u003cstrong\u003e44.1kHz sample rate\u003c/strong\u003e, \u003cstrong\u003e16 bits per sample\u003c/strong\u003e.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003eAdjusting Volume\u003c/h2\u003e\n\u003cp\u003eBy default the sound effects volume is set to \u003cstrong\u003e0.5\u003c/strong\u003e, or half-volume. If you would like to change the volume, change this line in\u0026nbsp;\u003cstrong\u003ezapper.py\u003c/strong\u003e:\u003c/p\u003e\n\u003cp\u003e\u003ccode\u003eself._mixer.voice[0].level = 0.5\u003c/code\u003e\u003c/p\u003e\n\u003cp\u003eAny value between \u003cstrong\u003e0.0\u003c/strong\u003e and \u003cstrong\u003e1.0\u003c/strong\u003e is valid.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}}]