[{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/214/original/lora-upright.jpeg?1728243493","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \u003cp\u003eSeveral years ago \u003ca href=\"https://www.solder.party/\"\u003eSolder Party\u003c/a\u003e released the \u003ca href=\"https://www.solder.party/docs/keyboard-featherwing/rev2/\"\u003eKeyboard Featherwing\u003c/a\u003e, a PCB that combines a Blackberry keyboard, a 320x240 TFT resistive touchscreen display, a 5-input DPAD, 4 tactile buttons, a microSD card reader, and more, all driven by an Adafruit Feather board of your choice. Eventually these were discontinued, I'm assuming because of the difficulty of sourcing the increasingly rare Blackberry keyboards. I didn't know what I wanted to do with them at the time, but I knew I was gonna want to do \u003cstrong\u003esomething\u003c/strong\u003e with them at \u003cstrong\u003esome\u003c/strong\u003e point, so I ordered several of them before the stock was depleted.\u003c/p\u003e\n\u003cp\u003eOne popular use for the Keyboard Featherwing has been to pair them with LoRa radio transceivers, to create a set of \"Doomsday Messengers\". These are devices that are able to send short text messages to each other using radio signals, sort of like walkie-talkies, but for text messaging. This makes sense: with the tactile keyboard, huge display, and instant compatibility with the Feather ecosystem (including the ability to use rechargable LiPo batteries), the Keyboard Featherwing practically seems designed for the use case!\u003c/p\u003e\n\u003cp\u003eI hacked together a quick demo a few years ago allowing for very basic communication between the devices, and then promptly lost interest. I wanted to write firmware that allowed for robust, reliable communication between the devices, but I also wanted something offering some of the affordances of a modern smartphone UI. If you've ever worked on UI for microcontrollers, you probably realize there are a lot of challenges. One of those challenges can be figuring out how to write a custom, complex UI with just the basic drawing functions provided by the commonly available drawing libraries. While possible, it can be really cumbersome once you start to want more modern UI features, such as widgets, scrolling, animation, multi-screen interfaces, and so on. Another challenge is implementing all of that in a performant way, given the limited speed and memory of most microcontrollers. At the time, I wasn't sure how I was to accomplish this without pulling my out my hair, so the project was put on the back burner.\u003c/p\u003e\n\u003cp\u003eRecently I decided to dig these up and give it another shot. I still wasn't sure exactly how I was going to do it, but I did have a concrete feature set in mind:\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ability to send encrypted, reliable messages between two paired devices using LoRa technology\u003c/li\u003e\n\u003cli\u003eThe ability to pair each device with any other device using the same hardware and firmware, via a settings screen (i.e., no re-compilation needed to pair devices)\u003c/li\u003e\n\u003cli\u003eThe ability to modify and persist device settings and a small message history across power cycles\u003c/li\u003e\n\u003cli\u003eGranular battery monitoring; specifically the ability to see the percentage of battery life remaining at any given time\u003c/li\u003e\n\u003cli\u003eHeavy focus on physical controls, using the touchscreen to supplement the UI only where practical and/or necessary (if you aren't familiar with any of my previous projects, I'm a huge fan of physical controls)\u003c/li\u003e\n\u003c/ul\u003e\n \n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eWhich Feather?\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe first choice I needed to make was which Feather board to use. A popular choice for this type of project has been the \u003ca href=\"https://www.adafruit.com/product/3178\"\u003eFeather M0 Packet Radio\u003c/a\u003e. The M0 is a nice little microcontroller, and with the built-in radio on this board it might seem like the obvious choice at first glance, but its 48MHz clock speed and scant 32k of RAM doesn't lend itself well toward driving a 320x240 16-bit display. For this task I needed something with a little more juice.\u0026nbsp;\u003c/p\u003e\n\u003cp\u003eFortunately, Adafruit has a Featherwing form factor for their radio boards, allowing us to pretty much use any Feather we want for packet radio communication. I decided that I would use an \u003ca href=\"https://www.adafruit.com/product/5000)\"\u003eESP32-S2 Feather\u003c/a\u003e coupled with the \u003ca href=\"https://www.adafruit.com/product/3231\"\u003eLoRa Featherwing\u003c/a\u003e. The ESP32-S2 has a nice speedy 240 MHz processor, 320KB of internal RAM, and a whopping 2MB of external PSRAM; perfect for driving the large display. Throw in a microSD card, a LiPo battery, and an antenna, and that takes care of all the hardware required to achieve the desired feature set. Additionally the Feather ESP32-S2 + LoRa Featherwing combo totals out to only about $3 more than the M0 radio Feather, so it's practically the same price for a \u003cstrong\u003emassive\u003c/strong\u003e upgrade. The ESP32-S2 Feather even has a built-in LiPo battery monitor!\u003c/p\u003e\n\u003cp\u003eThere's one other feature of the ESP32-S2 that makes it a neat choice for this project: it has a built-in 2.4GHz WiFi-capable radio featuring direct device-to-device communication, via ESP-NOW. I decided it would be cool if the Messenger firmware could also take advantage of this radio. This afforded me two practical options for messenger hardware configurations:\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003eSupport \u003cstrong\u003eESP-NOW only\u003c/strong\u003e, providing only short-range capability, but reducing the cost of the build as the additional LoRa board and antenna aren't necessary\u003c/li\u003e\n\u003cli\u003eSupport \u003cstrong\u003eESP-NOW and LoRa\u003c/strong\u003e, providing the ability to switch between short-range and long-range capability at runtime, providing compatibility with ESP-NOW-only messengers.\u003c/li\u003e\n\u003c/ol\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/215/original/esp-now.jpeg?1728243747","metadata":{"caption":"ESP-NOW-only messengers. Note the ESP-NOW tag in the upper left instead of the LoRa tag, and the lack of large antenna."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eBill of Materials\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eRequired:\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https://www.solder.party/docs/keyboard-featherwing/rev2/\"\u003eKeyboard Featherwing Rev 2\u003c/a\u003e (discontinued)\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/5000\"\u003eFeather ESP32-S2\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/2011)\"\u003e2000mAh LiPo battery\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003eMicroSD card (doesn't need to be large, only a couple of small files are saved)\u003c/li\u003e\n\u003cli\u003e3D printed case (see 3D printing section below)\n\u003cul\u003e\n\u003cli\u003e4 M2.5 heat set inserts\u003c/li\u003e\n\u003cli\u003e4 M2.5 x 12mm countersunk screws\u003c/li\u003e\n\u003c/ul\u003e\n\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003eOptional (for long-range capability):\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoRa Featherwing, either \u003ca href=\"https://www.adafruit.com/product/3231\"\u003e900 MHz\u003c/a\u003e or \u003ca href=\"https://www.adafruit.com/product/3232\"\u003e433 MHz\u003c/a\u003e, depending on country.\u003c/li\u003e\n\u003cli\u003eAntenna, either \u003ca href=\"https://www.amazon.com/dp/B0CTXL61LY\"\u003e915 MHz\u003c/a\u003e or\u0026nbsp;\u003ca href=\"https://www.amazon.com/Antenna-Frequency-Connector-SMA-Male-Receivers/dp/B0C1FCZM94\"\u003e433 MHz\u003c/a\u003e, depending on your LoRa radio hardware and country\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/1661\"\u003euFL SMT Antenna Connector\u003c/a\u003e\u003c/li\u003e\n\u003cli\u003e\u003ca href=\"https://www.adafruit.com/product/2940\"\u003eShort headers kit for Feather\u003c/a\u003e\u003c/li\u003e\n\u003c/ul\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eBuilding the Messenger\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"alert","content":"\u003cp\u003eNOTE: For the ESP-NOW-only messengers, I soldered on the headers that came included with the Feather ESP32-S2 in the standard configuration, since no additional hardware is needed. The following steps only apply to the LoRa-enabled version.\u003c/p\u003e","metadata":{"class":"element alert-element build-alert alert-info","markdown":"NOTE: For the ESP-NOW-only messengers, I soldered on the headers that came included with the Feather ESP32-S2 in the standard configuration, since no additional hardware is needed. The following steps only apply to the LoRa-enabled version.","alert_type":"info"}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eStep 1 - Solder Feather headers\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/218/original/feather-header.jpeg?1728244542","metadata":{"caption":""}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/217/original/feather-header-above.jpeg?1728244524","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eSolder the headers onto the Feather. Note the orientation of the headers in the photos above. The are inserted into the holes on the \u003cstrong\u003eunderside\u003c/strong\u003e of the Feather with the long side of the pins sticking out the top. The solder is applied to the pins on the top-side of the board.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eStep 2 - Configure LoRa Featherwing\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/216/original/lora-pins.jpeg?1728244512","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eSolder wires on the LoRa Featherwing as shown above. A different configuration can be used but it requires an update to the LoRa hardware pin assignments in the source code.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eStep 3 - LoRa Featherwing headers\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/219/original/lora-header.jpeg?1728244556","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eSolder the short female headers as shown above, with the headers inserted into the holes from the underside of the board, and solder applied to the pins sticking out the top.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \u003ch2\u003eStep 4 - uFL Antenna connector and antenna\u003c/h2\u003e\n \n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \u003cp\u003eSolder the uFL connector onto the antenna mount on the LoRa Featherwing (\u003ca href=\"https://learn.adafruit.com/radio-featherwing/assembly#ufl-connector-2057641\"\u003ethis learn guide\u003c/a\u003e has some good tips for soldering on the connector).\u003c/p\u003e\n \n\n","metadata":{}},{"element_type":"alert","content":"\u003cp\u003eDO NOT power on the microcontroller and radio module without an antenna attached! Doing so can permanently damage the radio module.\u003c/p\u003e","metadata":{"class":"element alert-element build-alert alert-danger","markdown":"DO NOT power on the microcontroller and radio module without an antenna attached! Doing so can permanently damage the radio module.","alert_type":"danger"}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eStep 5 - Connect the PCBs\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/220/original/header-sandwich.jpeg?1728244568","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe LoRa Featherwing is mounted to the top of the Feather, as shown in the photo above, and the Feather assembly plugs into the headers on the Keyboard Featherwing.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003e3D printing\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe original source for the 3D case design I used can be found at \u003ca href=\"https://www.printables.com/model/66291-lora-msg\"\u003ehttps://www.printables.com/model/66291-lora-msg\u003c/a\u003e. However, my current build only uses the face plate from this author. The middle piece is a remix by a different author, and I remixed 2 versions of the body piece: one with a USB hole to line up with the Feather/Featherwing sandwich shown above, and another to line up with the standalone Feather using the standard headers. I also designed a simple upright stand for the messengers for when they are not in use.\u003c/p\u003e\n\u003cp\u003eThe case requires \u003cstrong\u003e4 M2.5 heat set inserts\u003c/strong\u003e and \u003cstrong\u003e4 M2.5x12mm\u003c/strong\u003e \u003cstrong\u003ecountersunk screws.\u003c/strong\u003e\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eFace plate\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe face plate uses the file \u003cstrong\u003elora_msg_front_chief.stl\u003c/strong\u003e from \u003ca href=\"https://www.printables.com/model/66291-lora-msg\"\u003ehttps://www.printables.com/model/66291-lora-msg\u003c/a\u003e. Printed face-down at 15% infill with no supports.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eMiddle piece\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe middle piece uses the file \u003cstrong\u003eCommunicator_Mid_Mod.stl\u003c/strong\u003e from \u003ca href=\"https://www.thingiverse.com/thing:5212843\"\u003ehttps://www.thingiverse.com/thing:5212843\u003c/a\u003e. Printed as shown in the image on the site, using 15% infill and no supports.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eBody\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe two versions of the remixed body I used can be found on my Printables page at\u0026nbsp;\u003ca href=\"https://www.printables.com/model/1031410-lora-doomsday-messenger-body-remix\"\u003ehttps://www.printables.com/model/1031410-lora-doomsday-messenger-body-remix\u003c/a\u003e\u003c/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003elora-body-modified-lower-usb.stl\u003c/strong\u003e - This version is for the \"sandwiched\" Feather + LoRa Featherwing boards in the LoRa-enabled hardware configuration.\u003c/li\u003e\n\u003cli\u003e\n\u003cstrong\u003elora-body-standard-headers-usb.stl\u003c/strong\u003e - This version is for the ESP-NOW-only configuration using the Feather and standard-height headers.\u003c/li\u003e\n\u003c/ol\u003e\n\u003cp\u003eThis piece is printed with the open part facing down with supports on build plate enabled, using 15% infill.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eStand\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/242/original/stand.jpeg?1728485119","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe 3D file for the stand can be found at \u003ca href=\"https://www.printables.com/model/1031443-display-stand-for-keyboard-featherwing-messengers\"\u003ehttps://www.printables.com/model/1031443-display-stand-for-keyboard-featherwing-messengers\u003c/a\u003e. The stand was printed with no supports at 15% infill. I also attached some\u0026nbsp;\u003ca href=\"https://www.adafruit.com/product/550\"\u003elittle rubber bumper feet\u003c/a\u003e to the bottom for non-slip operation.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eFirmware - LVGL\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/241/original/logo_lvgl.png?1728254051","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThat takes care of the hardware, but what about the UI? Knowing that I didn't want to build the entire UI using basic drawing functions, I began looking around to see what kind of Arduino-compatible UI libraries existed. It didn't take me long to find the excellent \u003ca href=\"https://lvgl.io/\"\u003eLVGL library\u003c/a\u003e. LVGL was *exactly* what I was looking for. It's specifically designed for microcontrollers, has a rich feature set with dozens of widgets, tons of customization options, and is written in efficient and highly-portable C code. Given my experience with toolkits such as UIKit, and given LVGL's mature and capable APIs, it did not take me long to figure out how to piece together a functional version of the UI I envisioned.\u003c/p\u003e\n\u003cp\u003eFor the theme, I wanted to present something with modern widgets, but with a somewhat \"old-school\" aesthetic. I chose to use an amber and phosphor green color scheme, reminiscent of old CRT computer monitors.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eFirmware - UI Tour\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eMessages\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/222/original/conversation-1.png?1728245205","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe messages screen is the first screen that appears in the firmware. All messages sent to and received from the paired device will be displayed here. The Messages screen will show the last 10 messages sent/received. If the messages exceed the height of the screen, the message list can be scrolled using the touch screen or the \u003cstrong\u003eUP\u003c/strong\u003e/\u003cstrong\u003eDOWN\u003c/strong\u003e direction buttons on the 5-way DPAD. The history can be cleared by pressing the \u003cstrong\u003eClear\u003c/strong\u003e button on the right side of the title bar. The \u003cstrong\u003eCompose\u003c/strong\u003e and \u003cstrong\u003eSettings\u003c/strong\u003e buttons navigate to the Compose and Settings screens, respectively.\u003c/p\u003e\n\u003cp\u003eNote the small dot indicators underneath the \u003cstrong\u003eSettings\u003c/strong\u003e and \u003cstrong\u003eCompose\u003c/strong\u003e navigation buttons. This is to indicate that these on-screen buttons are paired to the \u003cstrong\u003ephysical buttons\u003c/strong\u003e on the Keyboard Featherwing directly underneath the indicators. In this case, pressing the\u0026nbsp;\u003cstrong\u003efirst\u003c/strong\u003e physical button is identical to tapping the \u003cstrong\u003eSettings\u003c/strong\u003e button on the touch screen, as is the \u003cstrong\u003efourth\u003c/strong\u003e physical button with the \u003cstrong\u003eCompose\u003c/strong\u003e button.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eCompose\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/221/original/compose-1.png?1728245179","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eFrom the Messages screen, pressing the \u003cstrong\u003eCompose\u003c/strong\u003e button in the bottom right will navigate to the Compose screen. Here is where the user types out their message to send to the paired device. The right side of the title bar displays the current character count of the message being entered. To send the message, the user presses the \u003cstrong\u003eSend\u003c/strong\u003e button.\u003c/p\u003e\n\u003cp\u003eIf a message is received while the user is composing a message, a \u003cstrong\u003eNew!\u003c/strong\u003e indicator will appear in the status bar, the NeoPixel will light up green, and the\u0026nbsp;\u003cstrong\u003eMessages\u003c/strong\u003e button will change to display the text\u0026nbsp;\u003cstrong\u003eNew Messages\u003c/strong\u003e. If the user returns to the Messages screen without sending, any text they have entered will still be there when navigating back to the Compose screen.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/230/original/compose-2.png?1728246460","metadata":{"caption":"Note the New! indicator in the status bar, and the \"New Messages\" text on the back button. This occurs if the user receives a message while in the Compose screen."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eSettings - General\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/231/original/settings-general-comp.png?1728246684","metadata":{"caption":"LEFT: ESP-NOW-only settings screen. RIGHT: LoRa-enabled settings screen. Note the extra \"LoRa\" settings tab."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003ePressing the \u003cstrong\u003eSettings\u003c/strong\u003e button in the bottom-left corner of the screen from the Messages screen will navigate to the Settings screen. Depending on the hardware configuration, the Settings screen will display three or four tabs (three if the device is ESP-NOW-only, four for LoRa-enabled devices).\u003c/p\u003e\n\u003cp\u003eIn the General tab, the user can adjust the display and keyboard brightness. The device can also be rebooted by pressing the \u003cstrong\u003eReboot\u003c/strong\u003e button.\u0026nbsp;Pressing the \u003cstrong\u003eSave \u0026amp; Exit\u003c/strong\u003e button will save any settings modifications and return to the Messages screen. The\u0026nbsp;\u003cstrong\u003eSave \u0026amp; Exit\u003c/strong\u003e button is disabled if any settings are invalid (for example, one of the encryption keys is not 16 characters long).\u0026nbsp;Tabs may be selected by tapping the tabs on the touch screen, or can be cycled by pressing the\u0026nbsp;\u003cstrong\u003eNext Tab\u003c/strong\u003e on-screen or physical button.\u003c/p\u003e\n\u003cp\u003eIf a message is received while in the Settings screen, a \u003cstrong\u003eNew!\u003c/strong\u003e indicator will appear in the status bar, and the NeoPixel will light up green.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eSettings - Encryption\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/226/original/settings-encryption-comp.png?1728245730","metadata":{"caption":"LEFT: Encryption settings on ESP-NOW-only device. RIGHT: Encryption settings on LoRa-enabled device."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eEncryption settings can be modified in the Encryption tab. Here the user can enter a 16-byte string for both the \u003cstrong\u003ePrimary Key\u003c/strong\u003e and the \u003cstrong\u003eLocal Key\u003c/strong\u003e. The \u003cstrong\u003ePrimary Key\u003c/strong\u003e is used by both ESP-NOW and LoRa modes, while the \u003cstrong\u003eLocal Key\u003c/strong\u003e is used in ESP-NOW mode only. Paired devices must use the same keys in order to communicate with each other. In ESP-NOW mode, messages using non-matching keys will be ignored. In LoRa mode, messages received from a paired device using a different \u003cstrong\u003ePrimary Key\u003c/strong\u003e will be garbled.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eSettings - ESP-NOW\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/228/original/settings-esp-now-comp.png?1728245856","metadata":{"caption":"LEFT: ESP-NOW settings on ESP-NOW-only device. RIGHT: ESP-NOW settings on LoRa-enabled device. Note the \"Switch to ESP-NOW\" button when device is in LoRa mode."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe ESP-NOW tab is where the user configures the MAC address for a paired device in ESP-NOW mode. The MAC address of user's device is displayed in green at the top by the \u003cstrong\u003eMy MAC\u003c/strong\u003e text. The user can enter the \u003cstrong\u003eOther MAC\u003c/strong\u003e address of a companion device to \"pair\" them (both devices must contain the companion device's address here).\u003c/p\u003e\n\u003cp\u003eFor LoRa-enabled devices, a \u003cstrong\u003eSwitch To ESP-NOW\u003c/strong\u003e button is enabled if the device is current in LoRa mode. When pressed, the device will reboot into ESP-NOW mode.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eSettings - LoRa\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/229/original/settings-lora-comp.png?1728245985","metadata":{"caption":"LEFT: LoRa settings screen when LoRa mode is active. RIGHT: LoRa settings screen when ESP-NOW radio is active. Note the \"Switch to LoRa\" button."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eFor LoRa-enabled devices, the LoRa tab is where the user can set the address of their own device and a companion device to \"pair\" them (both devices must contain the companion device's address here). The address is a single byte, with valid values ranging from 0-254 (255 is reserved).\u0026nbsp;\u003c/p\u003e\n\u003cp\u003eIf the device is currently in ESP-NOW mode, a \u003cstrong\u003eSwitch to LoRa\u003c/strong\u003e button will be present. Pressing this button reboots the device into LoRa mode.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003eFirmware - Source code and configuration\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eSource code\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eI used the VSCode IDE with the PlatformIO plugin to build the firmware for the Doomsday Messenger. Source code can be found at\u0026nbsp;\u003ca href=\"https://github.com/apendley/doomsday-messenger-lvgl\"\u003ehttps://github.com/apendley/doomsday-messenger-lvgl\u003c/a\u003e. Clone or download and unzip the repo, and open the folder in VSCode to view the project.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch2\u003eConfiguration\u003c/h2\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/232/original/main-config.png?1728252127","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch3\u003eMain configuration\u003c/h3\u003e\n\u003cp\u003eThe main config file can be found at \u003cstrong\u003einclude/config.h\u003c/strong\u003e. This file defines some hardware pin assignments for the Keyboard Featherwing. This file shouldn't need to change if the Messenger device uses the Keyboard Featherwing.\u0026nbsp;\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch3\u003eDevice configurations\u003c/h3\u003e\n\u003cp\u003eIn order to build the project, first a device configuration needs to be selected, and any necessary adjustments need to be made to the appropriate configuration header file. The project includes 4 device-specific configuration headers, found in the\u0026nbsp;\u003cstrong\u003einclude/devices\u003c/strong\u003e directory. Each one defines hardware configuration and default settings specific to each individual device. In my case, I built a pair of LoRa-enabled devices, and a pair of ESP-NOW-only devices, each with their own configuration, totally 4 configuration headers. I named them \u003cstrong\u003elora_1\u003c/strong\u003e, \u003cstrong\u003elora_2\u003c/strong\u003e, \u003cstrong\u003eespnow_1\u003c/strong\u003e, and \u003cstrong\u003eespnow_2\u003c/strong\u003e.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/233/original/device-configs-highlight.png?1728252830","metadata":{"caption":"The 4 built-in device configurations, with the lora_1.h configuration file selected"}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/234/original/espnow-1-config.png?1728252947","metadata":{"caption":"espnow_1 configuration. Note the lack of LoRa configuration settings."}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eThe\u0026nbsp;\u003cstrong\u003elora_1\u003c/strong\u003e/\u003cstrong\u003elora_2\u003c/strong\u003e and \u003cstrong\u003eespnow_1\u003c/strong\u003e/\u003cstrong\u003eespnow_2\u0026nbsp;\u003c/strong\u003econfigurations are set up to be paired with each other by default, using the same encryption keys and complimentary addresses (these can always be changed in the Settings screen on-device at runtime). This project takes advantage the enviroment feature in PlatformIO/VSCode in order to easily select the device configuration.\u003c/p\u003e\n\u003cp\u003eLet's use\u0026nbsp;\u003cstrong\u003elora_1\u003c/strong\u003e as an example configuration for a LoRa-enabled messenger device. First, we make any necessary changes in the\u0026nbsp;\u003cstrong\u003elora_1.h\u003c/strong\u003e file to match our hardware configuration and encryption key preferences.\u003c/p\u003e\n\u003cp\u003eNext, we need to let PlatformIO know which device to build for. At the bottom of the IDE window, look for the environment selector (highlighted below in red\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/235/original/env-select-1.png?1728253129","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eNext, select the \u003cstrong\u003eenv:lora_1\u003c/strong\u003e environment from the environment drop-down, highlighted below in red.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/237/original/env-select-2.png?1728253231","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eWait a few second for the IDE to re-configure the environment. When the overlay highlighted in red below disappears, we are ready to build the firmware.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/238/original/env-change-highlight.png?1728253368","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eBefore building, we may also want to set the ports for the devices we're uploading the firmware to. This can be done in the\u0026nbsp;\u003cstrong\u003eplatformio.ini\u003c/strong\u003e file, by uncommenting the \u003cstrong\u003eupload_port\u003c/strong\u003e setting and entering the specific port the device is plugged into (see below). This makes it easier to have multiple devices plugged in to your computer at the same time.\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/239/original/upload-port.png?1728253516","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eFinally, in the top-right corner of the IDE, click on the build button, and select \u003cstrong\u003eUpload\u003c/strong\u003e\u0026nbsp;\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/001/240/original/build.png?1728253843","metadata":{"caption":""}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003cp\u003eIf there are no issues, the firmware should compile and upload to the target device. For the paired device, the process should be repeated with the\u0026nbsp;\u003cstrong\u003elora_2\u003c/strong\u003e configuration (alternatively, use the \u003cstrong\u003eespnow_1\u003c/strong\u003e and \u003cstrong\u003eespnow_2\u003c/strong\u003e configurations if devices will not be LoRa-enabled).\u003c/p\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \u003ch1\u003ePossible Keyboard Featherwing alternative\u003c/h1\u003e\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"text","content":"\n \u003cp\u003eOf course, one obstacle to re-creating this project and taking advantage of the firmware is the discontinued Keyboard Featherwing. If you are interested in a project like this, and are willing to tinker with the firmware, I've identified an attractive alternative. The \u003ca href=\"https://www.lilygo.cc/products/t-deck?variant=43087936389301\"\u003eLILYGO T-Deck\u003c/a\u003e has a built-in ESP32-S3 microcontroller \u003cem\u003eand\u003c/em\u003e an SX1262 LoRa transceiver, as well as a MicroSD card reader, touchscreen, and a LiPo charging circuit, consolidating much of the base hardware necessary for this project. From what I can tell, the following modifications to the firmware would be required:\u003c/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ESP32-S2 and ESP32-S3 are similar enough that minimal changes should be required to support the S3.\u003c/li\u003e\n\u003cli\u003eSX1262 LoRa transceiver is supported by RadioHead, only the specific device driver would need to be swapped out\u003c/li\u003e\n\u003cli\u003eST7789 Display is supported by Adafruit. Should only be a matter of swapping out the specific driver instance, as the API should be identical\u003c/li\u003e\n\u003cli\u003eHardware pin assignments would need to be updated for the T-Deck\u003c/li\u003e\n\u003cli\u003eKeyboard library would need to be swapped out for the one used by the T-Deck\u003c/li\u003e\n\u003cli\u003eCode using the 5-way dpad and 4 tactile buttons would need to be removed\u003c/li\u003e\n\u003cli\u003eThe T-Deck uses a different touchscreen, so the driver would need to be replaced\u003c/li\u003e\n\u003cli\u003eCode to support the T-Deck trackball would need to be added\u003c/li\u003e\n\u003cli\u003eCode driving the Keyboard Featherwing's NeoPixel would need to be removed/omitted\u003c/li\u003e\n\u003cli\u003eDevice only has a voltage divider for measuring the battery, so battery monitor component would need to be modified/disabled\u003c/li\u003e\n\u003c/ul\u003e\n\u003cp\u003eThe battery connector on the T-Deck is different than the one used by the Feather, so a different battery or an adapter of some sort may be necessary to connect the battery to the T-Deck. Make sure to check the polarity!\u003c/p\u003e\n\u003cp\u003eA different 3D printed case would also be required. A \u003ca href=\"https://www.printables.com/search/models?q=lilygo+t-deck\"\u003ecursory search on Printables\u003c/a\u003e yields a nice selection of case options. LILYGO also sells the \u003ca href=\"https://www.lilygo.cc/products/t-deck-plus\"\u003eT-Deck Plus, a version with a case, GPS, and battery\u003c/a\u003e for a bit more if you'd rather use that.\u003c/p\u003e\n\u003cp\u003eIf you'd like this on a T-Deck but don't want to modify the code yourself, I could possibly be persuaded to do it for a generous donation of 2 T-Decks for testing.\u003c/p\u003e\n ","metadata":{}}]