[{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch1\u003eThe Idea\u003c/h1\u003e\n\u003cp\u003eI went down a bit of a rabbit hole a week or so ago when thinking about a better way to store all of the dev boards I have for testing. The ideal scenario is to have a lot of surface area to lay them all out so that you can see them all at a glance. No need to dig through anything. One way to do that is with shallow drawers, commonly call flat file storage. I found a flat file cabinet on Craiglist but it was pretty pricey and very large. They are often used for large prints that need to be kept flat. For dev boards, I don't need a lot of area together, just a lot overall.\u003c/p\u003e\n\u003cp\u003eAfter seeing \u003ca href=\"https://www.stampnstorage.com/drawer-cabinet/\"\u003ecreative drawer inserts for the Ikea Kallax bookshelf\u003c/a\u003e and \u003ca href=\"https://www.etsy.com/listing/1213437345/kubby-fur-kallax-6er-einsatz-aus\"\u003esome done in cardboard\u003c/a\u003e, I realized I could get custom cardboard boxes to fit in each square. I found \u003ca href=\"https://www.ecoenclose.com/\"\u003eEcoEnclose\u003c/a\u003e which makes custom sized shipping boxes low minimum order ($20) and now have just over 20 boxes for around $40. 10 of the shallowest boxes cost just under $20 and can fit in a single square. (The wood 10 drawer set is $140.)\u003c/p\u003e\n\u003cp\u003e \u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/152/original/IMG_2023.jpg?1694193856","metadata":{"caption":"10 of the shallow boxes stacked in one cube of the Expedit (ancestor of Kallax with same inner dimensions)."}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/153/original/IMG_2026.jpg?1694193856","metadata":{"caption":"FeatherWings stored in black anti-static foam inside a shallow box. They all have pin headers to hold them in place."}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/154/original/IMG_2027.jpg?1694193841","metadata":{"caption":"Collection of iMX RT EVK dev boards in a shallow box. Standoffs had to be removed. Ethernet jacks fit ok."}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003ch2\u003eThe Details\u003c/h2\u003e\n\u003cp\u003eEcoEnclose has variety of options for the \u003ca href=\"https://www.ecoenclose.com/shop/custom-shipping-boxes/\"\u003ecustom boxes\u003c/a\u003e: style, strength and \u003cem\u003einner\u003c/em\u003e dimensions. (The use is for going around another box for shipping.)\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/155/original/Screenshot_2023-09-07_at_13-45-26_Custom_Shipping_Boxes_100__Recycled_Mailing_Boxes_-_EcoEnclose.png?1694193841","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eMy first instinct was to get trays because they were drawer like and cheapest. However, making the \"chest\" to hold the drawers would be difficult and trays can tip everything out. Literature Mailer (LM) and Tab Locking (TL) enclose everything which means that the boards will stay in even when tipped. I got one LM sample box and some of the side tabs tore because they were very thin. The lid wasn't as secure as TL either. So, my future orders will all be TL.\u003c/p\u003e\n\u003cp\u003eStrength-wise, LM and TL boxes have three options 32E, 32B and 23B. As they cover in the YouTube video below, the number is the strength of the paper that forms the corrugate and the letter is the fluting, which also implies thickness. E fluting is 1/16\" thick and B is 1/8\" thick. Thickness is important to us for sizing since we're constrained on the outside, not inside.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"embed","content":"https://www.youtube.com/watch?v=oKRQZ7DQU6Q"},{"element_type":"text","content":"\n  \n  \n  \n  \n  \n  \n  \n  \n        \u003cp\u003eI ordered my 20 \"safe\" dimension boxes with 32E strength. I also order a couple samples of 32B and 23B. 23B was clearly weaker and tore much more easily. 32B felt less refined and didn't actually fit in the cube with the sizing I ordered. So, 32E is my go-to going forwards.\u003c/p\u003e\n\u003cp\u003eTo determine the ideal dimensions, I started with the Ikea dimensional drawing of the Kallax.\u003c/p\u003e\n      \n\n\n\n\n\n\n\n","metadata":{}},{"element_type":"image_url","content":"https://www.ikea.com/us/en/images/products/kallax-shelf-unit-white__1215327_pe911964_s5.jpg?f=xxl","metadata":{"alt":"Ikea","caption":"Ikea Kallax dimensional drawing showing the cube size."}},{"element_type":"text","content":"\n  \n  \n        \u003cp\u003eA single cube in the bookshelf is 13 1/4\" wide, 13 1/4\" high and 15 3/8\" deep. (On EcoEnclose, depth is the \"length\" dimension.) These are our max outer dimensions and the width is the strictest. Height dictates how many we can stack in a cube and depth dictates how much \"hangs out\" of the cubby. The back is open so it isn't critical.\u003c/p\u003e\n\u003cp\u003eMy primary boxes are 12 3/4\" wide, 15 3/8\" long (or deep) and 1 1/8\" high. This orients the tabs on the left side of the cubby. The height is 1/8\" more than the minimum 1\" and allows for 10 boxes in the total 13 1/4\" height. I got one sample box with 12 7/8\" width and it also fit (but more snugly). 13\" did not. I also got a sample 32E that is 2 1/4\" high and it is little shorter than two 1 1/8\" high boxes. So it could get another 1/8\" or two taller.\u003c/p\u003e\n\u003cp\u003eBelow is a screenshot of the settings. 11 boxes are \u003ca href=\"https://www.ecoenclose.com/shop/custom-shipping-boxes/\"\u003eordered\u003c/a\u003e to get the $1.90 price per box. (With 2 3/8\" high the minimum is 8 at $2.63 a box.) (Prices as of 9/7/2023.)\u003c/p\u003e\n      \n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/157/original/Screenshot_2023-09-07_at_14-17-44_Custom_Shipping_Boxes_100__Recycled_Mailing_Boxes_-_EcoEnclose.png?1694193845","metadata":{"caption":""}},{"element_type":"text","content":"\n  \n        \u003ch2\u003eShipping\u003c/h2\u003e\n\u003cp\u003eThe 26 boxes (20 \"safe\" and 6 samples) cost ~$13 to ship from Colorado to Seattle via UPS ground. They come with only one crease folded so the top is next to the bottom of the box. The sides and tab all need to be folded after receiving them. EcoEnclose has a video on how to do it.\u003c/p\u003e\n      \n","metadata":{}},{"element_type":"embed","content":"https://www.youtube.com/watch?v=zvTO57FbrsI"}]