[{"element_type":"text","content":"\n  \n  \n  \n        \u003cp\u003eNow that the awesome eTape liquid level sensor works with Adafruit IO No-Code devices, I figured this would be a good way to add a really accurate sensor to my house's sump pump to track the water level in the tank. I used a simple hose clamp to go through the 3d print and hold it in place on the main sump pump pipe. Then I can slide the device down so it rests on the bottom of the sump pump tank.\u003c/p\u003e\n\u003cp\u003eNext step is to connect this up and do some tests with Adafruit IO. I think I am going to use the FunHouse board with this.\u003c/p\u003e\n      \n\n\n","metadata":{}},{"element_type":"user_image","content":"https://cdn-learn.adafruit.com/user_assets/assets/000/000/116/original/IMG_4252_fixed.jpg?1683301484","metadata":{"caption":""}},{"element_type":"product","content":"https://www.adafruit.com/product/2656","metadata":{}},{"element_type":"product","content":"https://www.adafruit.com/product/4985","metadata":{}}]