[{"element_type":"text","content":"\n        \u003cp\u003eRecently the Chameleon 3D Mk4 has been fully open sourced. I believe it was said because of the plentiful availability of multi-material units (MMU's) for 3d printers, along with a desire to receive new inspiration from open source contributors into the core design / product.\u003c/p\u003e\n\u003cp\u003eIt's early days, the designs are published (3D models were already, but now the PCB (with easy JLCPCB ordering) and firmware. It's over at:\u003c/p\u003e\n\u003ch2\u003e\u003ca href=\"https://github.com/3DChameleon/3DChameleonMk4\"\u003ehttps://github.com/3DChameleon/3DChameleonMk4\u003c/a\u003e\u003c/h2\u003e\n\u003cp\u003eThe instructions are still in a form that ties to the kits, and mostly in video form, so there is a bit of assumed knowledge (like what parts you have). This will (no doubt) improve over time, as it's quite the undertaking to open source a project. Crucially the full pro version is effectively open sourced, and that includes a filament cutter!\u003c/p\u003e\n\u003cp\u003eRead more here: \u003ca href=\"https://www.3dchameleon.com/forum/getting-started/open-source-files\" target=\"_blank\"\u003ehttps://www.3dchameleon.com/forum/getting-started/open-source-files\u003c/a\u003e\u003c/p\u003e\n      ","metadata":{}}]