Getting Started
Adafruit Playground is a wonderful and safe place to share your interests with Adafruit's vibrant community of makers and doers. Have a cool project you are working on? Have a bit of code that you think others will find useful? Want to show off your electronics workbench? You have come to the right place.
The goal of Adafruit Playground is to make it as simple as possible to share your work. On the Adafruit Playground users can create Notes. A note is a single-page space where you can document your topic using Adafruit's easy-to-use editor. Notes are like Guides on the Adafruit Learning System but guides are high-fidelity content curated and maintained by Adafuit. Notes are whatever you want them to be. Have fun and be kind.
Click here to learn more about Adafruit Playground and how to get started.
-
¥enPocket 80 - A Handheld Arduino Console Inside Of An VHS Tape
Build the ¥enPocket 80 – A Retro Handheld Console from a VHS Tape!
Hi, I'm Miguel (aka @miguel_drmr), a 16-year-old indie creator from Brazil, and I’m super excited to share my DIY console:
The ¥enPocket 80 — a tiny retro-style handheld game console made from recycled VHS tapes, powered by an Arduino UNO, and super easy to build!
No 3D printer? No soldering experience? No problem. Let’s bring retro vibes to life with just a few cheap parts and some creativity.
What You’ll Need:
- 1x Arduino UNO (clone works!) The brain of the console
- 1x OLED Display 0.96" (I2C) The tiny screen
- 1x Pushbutton To control the game
- Jumper wires (male-male) For wiring everything up
- 1x Old VHS tape (used) The console shell! Reuse & recycle!
- 1x Simple box (optional) To pack or transport
Wiring the Console:
Let’s wire it up!
OLED Display:
VCC → 5V
GND → GND
SCL → SCL
SDA → SDA
Pushbutton:
One leg → Digital Pin 2
Other leg → GND
(We’ll use INPUT_PULLUP in the code)
Step 1: Prepare the Shell
Grab your VHS tape and open it up (trust me, this part is fun). Remove the reels and internal gears carefully.
Cut a hole where the screen will go — usually in the middle window of the tape.
Add a small hole for the button, and maybe one more for the USB cable if needed.
Step 2: Connect Everything
Use jumper wires to hook up the display and the button to your Arduino.
You can test the display using any basic I2C screen sketch.
Once it’s working, fix the screen behind the VHS window using glue or tape. Do the same for the button.
Step 3: Upload the Game
Use the Arduino IDE to upload the built-in game. You can use a Dino Run clone, a reaction tester, or any 1-button game.
I’ll link my open-source version here: ¥enPocket-Github
Step 4: Close It Up
Reassemble the tape and seal it — either with the original screws or with tape.
You now have a fully working game console inside a VHS tape!
Share Your Games:
You can share your games made for your ¥enPocket 80 on my Official Forum:
